3 cost-saving tips when pumping gas

Gas_Prices
Since we don’t actually take any crude when we “go to war for oil,” and since BP ruined any chances of us drilling off our own shores, I guess we’ll being paying a shit-ton at the pump for awhile. Here are some tips that can make you feel like you have some control over this mess.

1. Only buy or fill up your car or truck in the early morning when the ground temperature is still cold. Remember that all service stations have their storage tanks buried below ground. The colder the ground the more dense the gasoline, when it gets warmer gasoline expands, so buying in the afternoon or in the evening…your gallon is not exactly a gallon. In the petroleum business, the specific gravity and the temperature of the gasoline, diesel and jet fuel, ethanol and other petroleum products plays an important role.

A 1-degree rise in temperature is a big deal for this business. But the service stations do not have temperature compensation at the pumps.

2. When you’re filling up do not squeeze the trigger of the nozzle to a fast mode. If you look you will see that the trigger has three (3) stages: low, middle, and high. You should be pumping on low mode, thereby minimizing the vapors that are created while you are pumping. All hoses at the pump have a vapor return. If you are pumping on the fast rate, some of the liquid that goes to your tank becomes vapor. Those vapors are being sucked up and back into the underground storage tank so you’re getting less worth for your money, or so the story goes. Could be total BS though…..

3. One of the most important tips is to fill up when your gas tank is HALF FULL. The more gas you have in your tank the less air is occupying its empty space. Gasoline evaporates faster than you can imagine. Gasoline storage tanks have an internal floating roof. This roof serves as zero clearance between the gas and the atmosphere, so it minimizes the evaporation.

Comments are closed.